Monitor Manufacturers

Monitor Manufacturers

  • Pre-sale support by providing an instrument and lab baseline assessment of hundreds of biological, chemical and particle risk factors
  • Additive service complimenting continuous monitoring with annual or more frequent instrument and lab analysis
  • Development and execution of an SOP to install monitors using our 280 field consultants across 62 company owned offices
  • Nationwide sensor alert support for diagnosing root cause and recommending corrective actions when remote diagnostics are not successful

Case Studies From Our Clients

Lead Dust in Store

Problem

A construction project next door to a large, downtown retailer resulted in a layer of dust on all of the store’s products.  There was concern about the presence of lead and asbestos in the dust.  

Actions

Indoor Science was hired by the retailer’s insurer to determine if the store’s products had to be discarded or if they could be cleaned. We conducted large-scale sampling of the product and found multiple items with elevated levels of lead and asbestos in the dust. 

Conclusion

Indoor Science recommended disposing of the merchandise using licensed abatement contractors rather than attempting to clean the products and re-sell them to the public.

Raccoon in Home

Problem

A homeowner submitted a claim for extensive mold damage in a home stemming from a raccoon that was living in the attic. The claim was that the raccoons created holes in the roof that lead to water damage during rain events. 

Action

Indoor Science was hired to determine if all of the home’s mold was caused by the raccoon damage.  Indoor Science analyzed the mold present throughout the home.  

Conclusion

We concluded that some, but not all, of the mold was caused by the covered damage.

Fire in Home

Problem

A furnace fire in a million dollar home left the owners concerned about soot and poisonous gases throughout the home. The insurance company wanted an independent evaluation of the home to determine the full extent of the problem.  

Actions

Indoor Science opened several walls and used qualitative and quantitative methods for evaluating surfaces. 

Conclusion

Although Indoor Science found some additional areas needing restoration, the extensive damage claimed by the homeowner was not substantiated.

Mold in Distribution Center

Problem

A large distribution center for a footwear company had over 50,000 pairs of moldy shoes. Due to the large insurance claim, it was important to determine the source of the problem: did mold happen somewhere in the supply chain or in the distribution center itself? 

Actions

Indoor Science deployed over 20 air quality sensors across the unconditioned distribution center in order to track humidity throughout the facility. We found elevated humidity levels indoors on cooler, humid days.  We then tracked weather patterns over the four months prior to the mold event and compared them to nearly 20 years of historic weather data. 

Conclusion

Indoor Science found that the unseasonably cool and humid conditions of that summer were previously unseen since the company started using the distribution center.  Indoor Science set up a monitoring system whereby key staff would be notified if the situation arises again and a new dehumidification system could be activated to help prevent mold growth in the facility.

Contact Us

We provide customized pricing for each project we perform. The first step is providing us with some background information.